SISTEMA INTEGRAL DE INFORMACIÓN ACADÉMICA - PÚBLICO

Cabrera J.M.
(Autor externo)

Obras con ISBN:0
Documentos en revistas:25
Colaboraciones en Tesis:0
Patentes:0
Obras con ISBN:No hay obras de este autor.
Documentos en revistas:
1.- Erratum to ? Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review? [J. Alloys Compd. 1002 (2024) 174667](S0925838824012544)(10.1016/j.jallcom.2024.174667) (2025)
 
2.- Texture study of an AA5083 processed by Repetitive Corrugation and strengthening (2024)
 
3.- Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review (2024)
 
4.- Exploring the effects of repetitive corrugation and strengthening on alloy A5083 using X-ray diffraction techniques (2023)
 
5.- Texture and strain rate sensitivity analysis of solid solution and precipitation hardening aluminum alloys processed by repetitive corrugation and straightening (2023)
 
6.- Mechanical, stress corrosion cracking and crystallographic study on flat components processed by two combined severe plastic deformation techniques (2022)
 
7.- Repetitive corrugation and straightening effect on the microstructure, crystallographic texture and electrochemical behavior for the Al-7075 alloy (2022)
 
8.- Effect of the microstructure generated by Repetitive Corrugation and Straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy (2021)
 
9.- Study on the formability and texture evolution of AA6061 alloy processed by repetitive corrugation and straightening (2021)
 
10.- Microstructural evolution and mechanical behavior of an Al-6061 alloy processed by repetitive corrugation and straightening (2020)
 
11.- Effect of silicon on the hot flow behavior of ultra-low carbon austenite (2019)
 
12.- Transmission Electron Microscopy Characterization and High-Resolution Modeling of Second-Phase Particles of V- and Ti-Containing Twinning-Induced Plasticity Steel under Uniaxial Hot-Tensile Condition (2019)
 
13.- Residual stresses and microstructural evolution of ECAPed AA2017 (2019)
 
14.- High-temperature deformation of delta-processed Inconel 718 (2018)
 
15.- Deformation heterogeneity study of a 6061-T6 aluminum alloy processed by equal channel angular pressing (2017)
 
16.- Determination of critical stress for dynamic recrystallization of a High-Mn Austenitic TWIP steel micro-Alloyed with vanadium (2016)
 
17.- Effect of Ti microaddition on cavitation behavior during uniaxial hot-Tensile of Fe-22Mn-1.5Al-1.3Si-0.5C austenitic TWIP steel (2016)
 
18.- Microstructure and crystallographic texture development of microalloyed twinning induced plasticity (TWIP) steels under uniaxial hot-Tensile conditions (2016)
 
19.- Effect of Ti and B microadditions on the hot ductility behavior of a High-Mn austenitic Fe-23Mn-1.5Al-1.3Si-0.5C TWIP steel (2015)
 
20.- Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe-21Mn-1.3Al-1.5Si-0.5C TWIP steel (2014)
 
21.- Hot ductility behavior of high-Mn austenitic Fe-22Mn-1.5Al-1.5Si-0.45C TWIP steels microalloyed with Ti and V (2014)
 
22.- Mechanical properties and microstructure of low carbon ultra-high strength steels (UHSS) microalloyed with boron (2012)
 
23.- Effect of microalloying elements (B, Nb, V and Ti) on the strain hardening behavior of high-manganese TWIP steels (2012)
 
24.- Modeling of the hot deformation behavior of boron microalloyed steels under uniaxial hot-compression conditions (2008)
 
25.- Tuberculous optochiasmatic arachnoiditis (1981)
 
Colaboraciones en Tesis:No hay tesis de este autor.
Patentes:No hay patentes de este autor.