1 | Microstructural Characterization and Corrosion Behavior of Similar and Dissimilar Welded Advanced High-Strength Steels (AHSS) by Rotary Friction Welding | 2ᵒ autor: Lara Rodriguez G.Á., Salas Reyes A.E., González Parra J.R., Mercado Lemus V.H. | 2024 | Materials | WoS-id: 001168302900001 Scopus-id: 2-s2.0-85185840056
| 2 | 2 |
2 | Effect of the heat treatment on the compression of Cu20Sn matrix syntactic foams reinforced with Fe-hollow spheres | Coautor: Lara-Rodríguez G.A., Carranza L.E., Domratcheva-Lvova L., Figueroa I.A., et al. | 2024 | MATERIALS LETTERS | WoS-id: 001283689300001 Scopus-id: 2-s2.0-85199507310
| 0 | 0 |
3 | Influence of alloying elements on microstructure, mechanical properties and corrosion behaviour of hypoeutectic Sn-6.5wt%Zn-0.5 wt%X (X = Ag, Al, Cu) lead-free solders | Coautor: Lara-Rodríguez, G, González-Parra, R, Novelo-Peralta, O, Figueroa, I, et al. | 2024 | JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS | WoS-id: 001287525600008 Scopus-id: 2-s2.0-85200895440
| 0 | 0 |
4 | Assessment of the Microstructural Evolution of Naturally Aged Open-Cell Al-1.96Cu (at.%) Foams | Coautor: Lara-Rodríguez G.A., Azamar M.F., Hernández R., Figueroa I.A., et al. | 2024 | METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS | WoS-id: 001299948300001 Scopus-id: 2-s2.0-85202194787
| 0 | 0 |
5 | Phase transformations and porosity formation for Cu-Sn alloys over solution heat treated | Coautor: Lara, G., Carranza, L. E., Bejar, L., Aguilar, C., et al. | 2023 | MATERIALS LETTERS | WoS-id: 000882330400006 Scopus-id: 2-s2.0-85140430218
| 3 | 4 |
6 | The Hot Ductility, Microstructures, Mechanical Properties and Corrosion Resistance in an Advanced Boron-Containing Complex Phase Steel Heat-Treated Using the Quenching and Partitioning (Q&P) Process | Coautor: Lara-Rodriguez, Gabriel, Salas-Reyes, Antonio Enrique, Altamirano-Guerrero, Gerardo, Deaquino, Rogelio, et al. | 2023 | METALS | WoS-id: 000940740100001 Scopus-id: 2-s2.0-85149244259
| 4 | 3 |
7 | In-situ porosity formation of self-foaming Al-Fe-Cu alloys | Coautor: Lara-Rodriguez, G. A., Hernandez, J. M., Figueroa, I. A., Gonzalez, G., et al. | 2022 | APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING | WoS-id: 000770766200001 Scopus-id: 2-s2.0-85126808432
| 1 | 1 |
8 | Mechanical behavior of heat-treated Al-Cu-Mg open-cell foams | Coautor: Lara-Rodriguez, G. A., Figueroa, I. A., Mendieta, I., Azamar, M. F., et al. | 2021 | MATERIALS LETTERS | WoS-id: 000598396600008 Scopus-id: 2-s2.0-85096668141
| 7 | 6 |
9 | Determination of Chemical Composition of Compounds in Lead-Free Solder Alloy Sn-Zn-Al Using SEM/EDS | Coautor y autor de correspondencia: Lara-Rodriguez, G. A., Figueroa, I. A., Novelo-Peralta, O. | 2020 | METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS | WoS-id: 000543311200001 Scopus-id: 2-s2.0-85086939820
| 2 | 2 |
10 | Influence of the as-cast and cold rolled microstructural conditions over corrosion resistance in an advanced TWIP steel microalloyed with boron | Coautor: Rodriguez, Gabriel Lara, Reyes, Antonio Enrique Salas, Guerrero, Gerardo Altamirano, Alvarez, Jose Fernando Flores, et al. | 2020 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | WoS-id: 000547369600014
| 7 | 0 |
11 | Influence of the as-cast and cold rolled microstructural conditions over corrosion resistance in an advanced TWIP steel microalloyed with boron | Coautor: Rodriguez G.L., Reyes A.E.S., Guerrero G.A., Álvarez J.F.F., et al. | 2020 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | Scopus-id: 2-s2.0-85083441547
| 0 | 8 |
12 | Effect of Small Additions of Cr, Ti, and Mn on the Microstructure and Hardness of Al-Si-Fe-X Alloys | Coautor: Lara-Rodriguez, Gabriel A., Aranda, Victor A., Figueroa, Ignacio A., Gonzalez, Gonzalo, et al. | 2019 | METALS | WoS-id: 000460764700027 Scopus-id: 2-s2.0-85070854663
| 8 | 8 |
13 | Effect of the noble metals addition on the oxidation behavior of Ni3Al | Coautor: Lara-Rodriguez, G., Ramos-Hernandez, J. J., Porcayo-Calderon, J., Gonzalez-Rodriguez, J. G., et al. | 2018 | Advances in Materials Science and Engineering | WoS-id: 000423568300001 Scopus-id: 2-s2.0-85045957307
| 0 | 2 |
14 | Glass formation, thermal and mechanical properties of ZrCuAlNi bulk metallic glasses | Coautor: Lara-Rodriguez, G. A., Borja, C. E., Figueroa, I. A., Lozada-Flores, O., et al. | 2018 | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | WoS-id: 000438185500011 Scopus-id: 2-s2.0-85049495083
| 5 | 6 |
15 | A replication-casting device for manufacturing open-cell Mg foams | 1ᵉʳ autor: Lara-Rodriguez, G. A., Figueroa, I. A., Suarez, M. A., Novelo-Peralta, O., et al. | 2017 | JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | WoS-id: 000394483200003 Scopus-id: 2-s2.0-85004011356
| 29 | 33 |
16 | Crystallization kinetics of Cu55Hf45 glassy alloy | Coautor: Lara, G. A., Lozada-Flores, O., Figueroa, I. A., Gonzalez, G., et al. | 2017 | JOURNAL OF NON-CRYSTALLINE SOLIDS | WoS-id: 000397835400001 Scopus-id: 2-s2.0-85009461309
| 20 | 20 |
17 | Production of al foams using the SDP method: Processing parameters and introduction of a new sintering device | Coautor: Lara-Rodriguez, G. A., Cadena, J. H., Figueroa, I. A., Suarez, M. A., et al. | 2016 | JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY | WoS-id: 000372771500007 Scopus-id: 2-s2.0-84961113957
| 4 | 5 |
18 | Composition, Elastic Property and Packing Efficiency Predictions for Bulk Metallic Glasses in Binary, Ternary and Quaternary Systems | Coautor: Lara Rodriguez, Gabriel Angel, Borja Soto, Carlos Ernesto, Figueroa Vargas, Ignacio Alejandro, Fonseca Velazquez, Jose Ramon, et al. | 2016 | MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | WoS-id: 000374233300003 Scopus-id: 2-s2.0-84962766309
| 7 | 7 |
19 | A novel solid state method for manufacturing Al foams by over solution heat treatment | 2ᵒ autor: Lara, G., Alfonso, I., Gonzalez, G., Bejar, L., et al. | 2016 | MATERIALS LETTERS | WoS-id: 000374575700002 Scopus-id: 2-s2.0-84962545943
| 6 | 7 |
20 | Effect of Pt, Pd, Au and Ag on oxidation behaviour of Fe3Al intermetallic | Coautor: Lara-Rodriguez, G., Salinas, G., Gonzalez-Rodriguez, J. G., Porcayo-Calderon, J., et al. | 2016 | CORROSION ENGINEERING SCIENCE AND TECHNOLOGY | WoS-id: 000376607800004 Scopus-id: 2-s2.0-84978397745
| 1 | 1 |
21 | Fractal analysis of the heat treatment response for multiphase Al alloys | Coautor: Lara, Gabriel, Alfonso, Ismeli, Gonzalez, Gonzalo, Rodriguez, Manuel, et al. | 2016 | MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | WoS-id: 000380831200017 Scopus-id: 2-s2.0-84970996712
| 9 | 10 |
22 | Glass Forming Ability and Mechanical Properties of Zr57.52Co21.24Al9.24Ag12 bulk metallic glass | Coautor: Lara Rodriguez, Gabriel Angel, Borja Soto, Carlos Ernesto, Figueroa Vargas, Ignacio Alejandro, Verduzco Martinez, Jorge Alejandro | 2016 | MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | WoS-id: 000398451900015 Scopus-id: 2-s2.0-85042194298
| 2 | 2 |
23 | Magnetocaloric properties of rapidly solidified Dy3Co alloy ribbons | Coautor: Rodriguez, GAL, Llamazares, JLS, Flores-Zúñiga H., Álvarez-Alonso P., et al. | 2015 | JOURNAL OF APPLIED PHYSICS | WoS-id: 000354984100053 Scopus-id: 2-s2.0-84923675217
| 2 | 3 |
24 | Development of a stress-induced martensitic transformation criterion for a Cu-Al-Be polycrystalline shape memory alloy undergoing uniaxial tension | Coautor: Lara-Rodríguez G.A., García-Castillo F.N., Cortés-Pérez J., Amigó V., et al. | 2015 | ACTA MATERIALIA | WoS-id: 000359875800014 Scopus-id: 2-s2.0-84938074411
| 3 | 3 |
25 | Development of pure Mg open-cell foams as structured CO2 captor | Coautor: LaraRodriguez, GA, Figueroa, IA, Suarez, MA, VelascoCastro, M, et al. | 2015 | THERMOCHIMICA ACTA | WoS-id: 000366538800009 Scopus-id: 2-s2.0-84947751741
| 5 | 6 |
26 | Shape memory behavior of Ni-Fe-Ga and Ni-Mn-Sn ribbons | Coautor: Lara-Rodriguez, G.A., Villa, E., Agilar-Ortiz, C.O., Lvarez-Alonso, P.Á., et al. | 2015 | MATEC Web of Conferences | WoS-id: 000372402800051 Scopus-id: 2-s2.0-84976467532
| 5 | 5 |
27 | Production of Al-Cu-Fe metallic foams without foaming agents or space holders | Coautor: Lara-Rodriguez, GA, Suarez, MA, Figueroa, IA, Gonzalez, G, et al. | 2014 | JOURNAL OF ALLOYS AND COMPOUNDS | WoS-id: 000327492600045 Scopus-id: 2-s2.0-84885495179
| 20 | 23 |
28 | Manufacturing of open-cell Mg foams by replication process and mechanical properties | Coautor: Lara-Rodriguez, GA, Osorio-Hernandez, JO, Suarez, MA, Goodall, R, et al. | 2014 | MATERIALS & DESIGN | WoS-id: 000342681600018 Scopus-id: 2-s2.0-84908129439
| 60 | 74 |
29 | Electrochemical study on effect of Au, Ag, Pd and Pt on corrosion behaviour of Fe3Al in molten NaCl-KCl | Coautor: Lara-Rodriguez G., Salinas G., Gonzalez-Rodriguez J.G., Porcayo-Calderon J., et al. | 2014 | CORROSION ENGINEERING SCIENCE AND TECHNOLOGY | WoS-id: 000346128400009 Scopus-id: 2-s2.0-84904730407
| 3 | 3 |
30 | Metallic glass formation in the binary Cu-Hf system | Coautor: Lara-Rodriguez G.A., Figueroa I.A., Plummer J.D., Novelo-Peralta O., et al. | 2013 | JOURNAL OF MATERIALS SCIENCE | WoS-id: 000312906000046 Scopus-id: 2-s2.0-84871921678
| 14 | 15 |
31 | Microstructural and mechanical study of the Al-20Sn (mass%) alloy processed by equal-channel angular pressing by route C | Coautor: Lara-Rodriguez G.A., Hernández C., Figueroa I.A., Braham C., et al. | 2013 | MATERIALS TRANSACTIONS | WoS-id: 000322418700024 Scopus-id: 2-s2.0-84878896463
| 5 | 6 |
32 | Effect of quenching rate on the average grain size and martensitic transformation temperature in rapidly solidified polycrystalline Ni 50Mn37Sn13 alloy ribbons | Coautor: Lara-Rodriguez, AG, Quintana-Nedelcos, A, Llamazares, JLS, Rios-Jara, D, et al. | 2013 | PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE | WoS-id: 000329299700010 Scopus-id: 2-s2.0-84886091415
| 39 | 42 |
33 | Analysis of the microstructural evolution and solidification behaviour of Sn-9 wt% Zn alloy with small additions of Mg | Coautor: Lara-Rodriguez, GA, Figueroa, IA, Novelo-Peralta, O, Suareza, MA | 2013 | JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY | WoS-id: 000331787800008 Scopus-id: 2-s2.0-84897601391
| 3 | 3 |
34 | Magnetization study of the kinetic arrest of martensitic transformation in as-quenched Ni52.2Mn34.3In13.5 melt spun ribbons | Coautor: Lara-Rodríguez A.G., Lino-Zapata F.M., Sánchez Llamazares J.L., Ríos-Jara D., et al. | 2013 | Materials Research Society Symposium Proceedings | Scopus-id: 2-s2.0-84880866006
| 0 | 2 |
35 | New evidence on the nature of the metastable S ''-phase on Al-Cu-Mg alloys | Coautor: Lara-Rodriguez, G, Novelo-Peralta, O, Figueroa, IA, Gonzalez, G | 2011 | MATERIALS CHEMISTRY AND PHYSICS | WoS-id: 000295601700071 Scopus-id: 2-s2.0-80052572362
| 9 | 10 |
36 | Use of time history speckle pattern and pulsed photoacoustic techniques to detect the self-accommodating transformation in a Cu-Al-Ni shape memory alloy | Coautor: Lara-Rodriguez A.G., Sánchez-Arévalo F.M., Aldama-Reyna W., García-Fernández T., et al. | 2010 | MATERIALS CHARACTERIZATION | WoS-id: 000278263000004 Scopus-id: 2-s2.0-77950921334
| 7 | 9 |
37 | Prediction and characterization of growth temperatures in Al-Zn-Mg alloys | 2ᵒ autor: Lara, AG, Suarez, MA, Sanchez-Arevalo, FM, Aluarez, O, et al. | 2009 | MATERIALS CHARACTERIZATION | WoS-id: 000265153800010 Scopus-id: 2-s2.0-61449261793
| 4 | 4 |
38 | Characterization of precipitation in Al-Mg-Cu alloys by X-ray diffraction peak broadening analysis | Coautor y autor de correspondencia: Lara-Rodriguez, GA, Novelo-Peralta, O, Gonzalez, G | 2008 | MATERIALS CHARACTERIZATION | WoS-id: 000255429900016 Scopus-id: 2-s2.0-41449087397
| 33 | 37 |
39 | The influence of cooling rate on the microstructure of an Al-Ni hypereutectic alloy | 2ᵒ autor: Lara-Rodriguez G.A., Gonzalez G., Sandoval-Jiménez A., Saikaly W., et al. | 2008 | MATERIALS CHARACTERIZATION | WoS-id: 000260293500012 Scopus-id: 2-s2.0-51849153858
| 26 | 27 |
40 | Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons | Coautor: Lara G., Figueroa I.A., Betancourt I., Verduzco J.A. | 2005 | JOURNAL OF NON-CRYSTALLINE SOLIDS | WoS-id: 000232347200015 Scopus-id: 2-s2.0-24944471875
| 22 | 23 |